Cart
Your cart is currently empty.
Replace brake rotors

Replace brake rotors

Replacing brake rotors is an important part of maintaining your vehicle's braking system. Here are the general steps to replace brake rotors:

1. Lift the car: Use a jack to lift the car and secure it on jack stands.

2. Remove the wheels: Loosen the lug nuts, remove the wheels, and set them aside.

3. Remove the brake caliper: Use a wrench to remove the caliper bolts and then carefully remove the caliper from the rotor. Hang the caliper from the suspension using a wire hanger or bungee cord to avoid putting stress on the brake line.

4. Remove the brake pads: Take out the brake pads from the caliper bracket.

5. Remove the brake rotor: The rotor may be held in place by a retaining screw or may simply slide off once the caliper and pads are removed. If it's stuck, you may need to tap it gently with a mallet to loosen it

6. Install the new rotor: Clean the hub surface where the rotor sits and then slide the new rotor onto the hub.

7. Reinstall the brake caliper and pads: Place the brake pads back into the caliper bracket and then reattach the caliper to the rotor.

8. Put the wheels back on: Secure the wheels onto the car and lower it back down.

9. Test the brakes: Before driving, pump the brake pedal a few times to ensure proper brake pad seating and then test the brakes at low speeds to make sure they are working correctly.

Remember to follow the specific instructions for your vehicle model and consult a professional if you are unsure about any step in the process.

Tags



    Translation missing: en.general.search.loading