Rear Brake Pads and Discs Cost UK: What You Will Pay in 2026
Rear brake pads and discs cost depends on the vehicle, parts specification and where the work is carried out. For a typical car in the UK in 2026, published guides indicate that replacing rear pads alone may cost around £70–£150 at an independent garage, while rear pads and discs together commonly fall between £145 and £375. Larger, premium or specialist vehicles may exceed these ranges.
These are indicative guides, not a quote for a particular car. Prices vary by make and model, location, parts and labour rates. The estimates below are generally for both rear wheels (one axle); confirm what is included before approving work.
Typical rear brake replacement costs in 2026
- Rear brake pads only: around £70–£150 at an independent garage. Dealer prices may be higher; published estimates can reach around £130–£240. Checkatrade’s 2026 guide gives a broader average of approximately £100–£130, while BookMyGarage reports a range of £64–£231. The difference reflects varied vehicles, locations and pricing samples. (MotR, Checkatrade, BookMyGarage)
- Rear brake discs and pads together: about £145–£375 at an independent garage for many everyday cars. Published estimates vary by vehicle class: Mecascan gives approximately £145–£310 for a city car and £175–£375 for a family car or SUV. Premium vehicles can cost more. (Mecascan, BookMyGarage)
- Mobile fitter: published mobile-mechanic prices are commonly around £100–£300 for pads and £200–£500 for pads and discs, per axle. The final figure depends on the vehicle, parts and whether the job can be completed with the fitter’s equipment. (BookMyGarage mobile mechanics, RAC)
The averages reported by different services do not always match. For example, BookMyGarage’s 2026 data puts the average rear pads-and-discs job at about £248, while its make-specific estimates range from roughly £215 for a Mazda to £306 for a BMW. These figures show why an average should not be treated as a vehicle-specific price.

Garage or mobile fitter: what affects the difference?
A garage can use a vehicle lift and workshop diagnostic equipment, which may be needed for some rear brake jobs. Mobile fitting can save a trip and may suit a straightforward replacement, but the service range varies between providers. Some mobile fitters may not be equipped to handle every electronic parking brake system.
When comparing a garage with a mobile fitter, check that each quote covers the same work:
- Are the prices for both rear wheels, including parts, labour and VAT?
- Are the replacement discs and pads specified, and are they suitable for the vehicle?
- Is an electronic parking brake service or diagnostic reset included if required?
- Could extra work be needed if a caliper is seized or another component is damaged?
A mobile quote may include a call-out charge, while a garage quote may reflect local labour rates and workshop overheads. Neither option is automatically cheaper in every area. The total should be confirmed for the registration and location before booking.
What can increase the rear brake disc replacement cost?
The rear brake discs and pads cost can rise when the vehicle needs more than standard parts and labour:
- Vented rather than solid discs: disc type and size vary by vehicle. Vented discs have internal channels and may cost more than a basic solid disc, depending on the specification.
- Electronic parking brake (EPB): the parking brake may need to be put into service mode using diagnostic equipment before the rear caliper piston can be retracted. A reset or calibration may also be required afterwards. Fixter’s published estimates show different ranges for vehicles with and without an EPB. (Fixter)
- Wear sensors: some vehicles use sensors to alert the driver when pads are worn. A new sensor may be required as part of the job, depending on its design and condition.
- Seized calipers or hardware: a sticking caliper, corroded slider pins or damaged fittings can require additional labour or replacement parts. This is separate from replacing pads and discs, so any extra work should be explained and agreed before it is carried out.
- Vehicle and location: part availability, vehicle design, local labour rates and the parts brand chosen all affect the quote.
The cheapest estimate may not include every required part or procedure. It is beneficial to compare quotes on the same scope of work, so that a lower headline figure is not mistaken for the final bill.
When do rear brakes need replacing?
Rear brakes should be inspected if their performance changes or a warning appears. Common signs include:
- Grinding or scraping: this may indicate that friction material has worn away and metal is contacting the disc. It requires prompt attention; avoid driving if braking is impaired or the noise is severe.
- Squealing: a wear indicator may make contact with the disc as a pad reaches its service limit. Not all vehicles have this feature, and other faults can also create noise.
- Longer stopping distances or a change in braking feel: these can have several causes, but should not be ignored.
- Longer handbrake travel or reduced holding ability: this may be associated with a rear brake fault or adjustment issue. An inspection is needed to identify the cause.
- Scoring, deep grooves or visible damage on a disc: a technician can check whether it remains within the manufacturer’s limits.
- A dashboard brake-wear warning: where fitted, this should be checked rather than reset without inspection.
The friction material and disc condition should be assessed together. Discs are commonly replaced in pairs across the axle, and new pads are fitted with them, but the required work depends on inspection and vehicle specifications. The AA’s guide explains common wear signs and why a professional inspection may be needed. (The AA)

Why can rear pads wear faster than expected?
Rear pads are sometimes expected to last longer, but wear depends on vehicle design and use. On some modern cars, electronic stability control (ESC) and brake-based torque vectoring can apply braking selectively at individual wheels. These interventions help manage the vehicle’s direction and stability, but repeated use may add wear to the pads involved.
This is not the same for every model or driver. Frequent stop-start journeys, repeated stability-control interventions and a caliper that does not release fully can also contribute to uneven or unexpectedly rapid rear-pad wear. A pad wearing much faster on one side should be investigated, rather than treated as ordinary wear without a check. (BuyBrakes, RAC)

Check the vehicle-specific price before booking
To check what rear brake work may cost for a particular vehicle, use Auto Greene’s vehicle services hub or browse the service, repair and MOT options. Vehicle identification helps narrow down compatible options; the final scope and price should be confirmed before booking. Parts can also be explored through the Auto Greene parts collection.
The published prices in this guide are indicative only and may change. If a warning light, grinding noise or change in braking performance is present, delay can allow further wear or damage and increase the eventual repair work.
Sources
- BookMyGarage: Brake pads and discs cost
- Checkatrade: Brake pad replacement cost
- Mecascan: Rear brake discs and pads cost
- MotR: When to change brake pads
- Fixter: Brake discs and pads replacement
- BookMyGarage: Mobile brake fitting and repairs
- RAC: Brake pads and discs repair
- The AA: Signs that brake pads or discs need replacing
- BuyBrakes: Brake pad wear and driving aids