Cart
Ihr Einkaufswagen ist im Moment leer.
A mechanic inspecting a rear coil spring as part of a suspension repair

Coil Spring Replacement Cost UK: What a Broken Spring Really Costs in 2026

A coil spring supports the vehicle’s weight, helps maintain ride height and absorbs the force of bumps in the road. If one breaks, replacement is required: a spring cannot be repaired safely. The final coil spring cost depends on the vehicle, whether the fault is at the front or rear, and how much dismantling is needed.

The UK figures below are indicative published ranges, not guaranteed prices. They vary by vehicle specification, location, parts and garage. A quote based on the vehicle registration and an inspection is needed for an accurate cost.

Coil spring replacement cost in the UK

Published prices are not always directly comparable. Some guides show the cost for one spring at one corner, while others quote for a pair on the same axle. Always check which job the figure covers.

Work or parts Indicative published range What the figure covers
One fitted spring at one corner £113–£226 front; £113–£210 rear Fixter’s published estimates for an individual spring replacement
Pair of springs, parts only £100–£250 Checkatrade’s materials-only range for a pair
Pair fitted on one axle £175–£400 Checkatrade and ClickMechanic published ranges; averages are £275 front and £210 rear at Checkatrade, £248 at ClickMechanic
Parts and labour per axle £250–£450 GSF Car Parts’ published guide range

The Fixter coil spring cost guide gives an indication of a single-corner job. However, springs are normally replaced in pairs, so the cost of the recommended repair is often closer to the published pair prices. Checkatrade’s 2026 cost guide was updated in October 2026; ClickMechanic and GSF Car Parts publish their own UK ranges.

These guides use different methods and job scopes, which explains some of the variation. Front and rear costs also differ: front springs are often part of a strut assembly and can take longer to access, while rear-suspension layouts vary between vehicles.

Coil springs shown in a suspension replacement cost guide

Independent garage versus dealer

Published repair guides provide ranges for spring replacement, but there is no single reliable UK dealer price range that applies across makes and models. As a broad indication, the cited guides put a pair fitted at a garage between £175 and £450 per axle, depending on the vehicle and the work included. A franchised dealer may quote differently according to its parts and labour rates.

Fixter states that its prices average 30% below main-dealer prices. This is a provider’s comparison, not a guaranteed saving or a like-for-like dealer price list. When comparing an independent garage with a dealer, confirm that both quotes cover the same axle, pair of springs, parts quality, labour and any additional work.

What pushes the broken coil spring replacement cost up?

The spring itself is only part of the job. The mechanic must reach, remove and fit the component safely. The following can affect the total:

  • Vehicle and spring specification: Spring design varies by make, model, engine and suspension setup. Larger or specialist vehicles may need more costly parts.
  • Front strut disassembly: On many vehicles, a front spring sits around the strut. The assembly may need to be removed and dismantled before the spring can be replaced.
  • Spring compressor requirement: A spring stores significant energy. Where compression is required, the correct equipment and safe procedure are essential.
  • Corrosion and seized mountings: Rusted or seized fasteners can take longer to remove. A snapped spring can also make inspection and handling more difficult.
  • Related worn parts: Once the suspension is apart, a mechanic may identify worn mounts, bearings, bushes or dampers. These should be explained and agreed before extra work is carried out.
  • Wheel alignment: Alignment may be checked or recommended after suspension work, particularly if components affecting wheel position have been disturbed. Ask whether it is included or charged separately.

Ask for an itemised quote that states whether it covers one spring or a pair, the parts specification, labour and any alignment check. This makes comparisons more useful.

Why coil springs snap

A spring is repeatedly compressed and released as the car travels. Over time, this can weaken the metal. Common contributing causes include:

  1. Corrosion: Water and road salt can damage the spring’s protective coating, allowing rust to develop and weaken the steel.
  2. Potholes and road impacts: A hard impact can add stress to a spring that is already worn or corroded.
  3. Speed humps and uneven surfaces: Repeated heavy impacts can contribute to damage, especially when driven over at speed.
  4. Metal fatigue: After years of use, repeated suspension movement can eventually cause a crack or fracture.

A break may happen suddenly, but the underlying weakness can have developed over time. Corrosion, impact and fatigue can overlap.

Front coil springs being replaced during suspension work

Signs that a spring may be broken

A broken spring can affect ride height, handling and the way the suspension responds. Look out for:

  • Uneven ride height: One corner or side of the car appears lower than the others.
  • Clunking or knocking over bumps: A broken or displaced spring may move against nearby suspension parts.
  • A change in ride or handling: The car may feel unsettled, unusually bouncy or harsher over uneven roads.
  • The vehicle pulling to one side: This can have other causes, but a spring fault should be checked if the car’s direction or handling changes.
  • A warning at an MOT: A fractured spring can result in an MOT failure. ClickMechanic’s guidance explains that springs may be rejected if cracked, fractured or seriously weakened by corrosion.

These signs can also be caused by other suspension faults. An inspection is needed to confirm the source. If a spring is visibly broken, the car sits unevenly or handling has changed, avoid treating the noise as a minor issue. A broken spring can damage a tyre or affect vehicle control, so it should be assessed promptly. The AA’s broken spring advice also advises against driving with a broken spring.

Why springs are normally replaced in pairs

Springs on the same axle have usually experienced similar mileage, loads and road conditions. If a new spring is fitted on one side while the older spring remains on the other, the pair may not support the vehicle equally. This can affect ride height and handling.

For that reason, mechanics commonly recommend replacing both front springs or both rear springs together. It does not usually mean replacing all four. The opposite spring should be inspected and the recommendation explained, particularly if it appears to be in good condition.

What to check before approving a quote

Before agreeing to coil spring replacement, ask the garage to confirm:

  1. Whether the repair covers one spring or the pair on that axle.
  2. Whether the quote includes parts and labour, and what parts specification is being used.
  3. Whether strut dismantling, seized fixings or related worn components could add work.
  4. Whether wheel alignment is recommended and included.
  5. What additional work will cost, and whether approval will be requested before it is carried out.

A coil spring replacement is a safety-related suspension repair, not a suitable first-time DIY job. Specialist spring compressors and correct fitting procedures are required where the spring is under tension. Delaying an inspection after a break can aggravate damage and increase the eventual repair work.

For vehicle servicing or repair options, see AutoGreene’s vehicle services hub. Vehicle parts and accessories can be browsed through the AutoGreene parts collection; compatibility and availability should be checked for the specific vehicle.

Sources


Tags



    Translation missing: de.general.search.loading